forum.pistar.uk

I have Pi Zero W Rev 1.1 (Pi-Star:3.4.17) hotspot.
FW Pi-Star:3.4.1

is it possible to update Pi-star 3.4.17 to 4.1.1 by update from command mode (SSH session)?

TNX. 73

No. You can only update to the latest release in that series. In the case of 3.4 that would be 3.4.17.

Moving to a new release series needs the newer release downloading and burning to the sd card.

You'll find it at pistar.uk/downloads

Sent from my SM-G935F using Tapatalk

Thanks.
I already upgrade it up to 4.1.2.

M1DNS wrote: ↑Fri May 08, 2020 10:42 pm No. You can only update to the latest release in that series. In the case of 3.4 that would be 3.4.17.

Moving to a new release series needs the newer release downloading and burning to the sd card.

You'll find it at pistar.uk/downloads

Sent from my SM-G935F using Tapatalk

I find only Pi-Star_OrangePi_Zero_V3.4.17_09-Jan-2019.zip from download page,
where 4.x lures ?

Pistar.uk/download 4.1 release build supports raspberry pi foundation boards. To date there has been no futhur development for the other SBC's, they still stand at 3.4.17

Sent from my SM-G935F using Tapatalk

hi,

What's the PI-Orange problem whit 4.X versions.
Could I just get pi-star parts from github,... I saw there version
5.0 and setup ?? Any instruction to build compile where ?
Any instructions to share build versions ?

The image and support hasnt been written for the other boards. If you have anything but a raspberry pi, your currently stuck at 3.4

Vers. 5 is the new dashboard build, which is still very much under developement.


Sent from my SM-G935F using Tapatalk