Wireing MMDVM_HS_HAT_DUPLEX , orange pi zero ?
Posted: Mon Jun 08, 2020 7:14 am
Wireing MMDVM_HS_HAT_DUPLEX, 2018 v.1.0 , orange pi zero ?
Is there wireing diagram anywhere?
Or what pins pi orange zero image is useing and
should match MMDVM ?
While purhasing orange pi i did not relized
pin arragment is lot diffrent!!
I have only one connector connected and other
is not due orange-pi connector is very short.
I'am assuming that's needed only for updateing
mmdvm?
I get after power up:
-screen scrolling MMDVM
-it connect's to brandmeister and registres station as repeater (wanna have hotspo), and drops out
-it shows tcxo 14 and HS HAT 1.4.7 version ,.. so I assume pi-star talk's correctly to mmdvm
-CVS is blinking at MMDV
- nothing at log's if powered you can see dashboard http://oh5bzr.hamshack.info/pi-star/
73' de oh5bzr
This I know:
Pi-orange zero vs. rasbery pinouts: https://kaspars.net/blog/orange-pi-zero-gpio
I have mmdvm https://www.aliexpress.com/item/4000615 ... 4c4dJpYaR5
have tried:
-to find mmdvm schematic to solve out what pins realy needed
-some documentation is there difrences how pins are used pi-orange image !
Is there wireing diagram anywhere?
Or what pins pi orange zero image is useing and
should match MMDVM ?
While purhasing orange pi i did not relized
pin arragment is lot diffrent!!
I have only one connector connected and other
is not due orange-pi connector is very short.
I'am assuming that's needed only for updateing
mmdvm?
I get after power up:
-screen scrolling MMDVM
-it connect's to brandmeister and registres station as repeater (wanna have hotspo), and drops out
-it shows tcxo 14 and HS HAT 1.4.7 version ,.. so I assume pi-star talk's correctly to mmdvm
-CVS is blinking at MMDV
- nothing at log's if powered you can see dashboard http://oh5bzr.hamshack.info/pi-star/
73' de oh5bzr
This I know:
Pi-orange zero vs. rasbery pinouts: https://kaspars.net/blog/orange-pi-zero-gpio
I have mmdvm https://www.aliexpress.com/item/4000615 ... 4c4dJpYaR5
have tried:
-to find mmdvm schematic to solve out what pins realy needed
-some documentation is there difrences how pins are used pi-orange image !