change temp fro celcious to fahrenheit

All things relating to the Nextion Screen(s)
WD0AJG
Posts: 7
Joined: Sat Apr 14, 2018 6:29 am

Re: change temp fro celcious to fahrenheit

Post by WD0AJG »

It worked before the last update to 4.1.0.rc8. at least for me. Now on 4.1.0(RC8) they jump back to C value on the nextion display. It briefly shows F value when it starts up.

In addition on my two 3A+ hotspots (with 3.2 nextion via usb-ttl) they are locking up? At present I am testing via another 3A+ one piece at a time. ran the pi 3A+ with no hat and no screen over night and it did not lock up. today it will run with mmdvm hat (no screen) and see how that goes for a day or two. I run a usb voltage tester and checked the via "dmesg | grep -i volt" and see no voltage problems (yet) on the 3A's but did through other checking see an issue on my 3B+ that has a 7 inch "P" screen (another issue I will have to work on). Neither of the 3A's locked up when I was using 4.0.0 and they run about 7+ degrees cooler on 4.0.0 vs 4.1.0. I know the limits are much higher but I wonder if running around 57 C might be an issue so I am doing more tests for that
Post Reply