Page 2 of 2
Re: Model 8 - Observed Issues
Posted: Wed Dec 05, 2018 1:19 am
by N3MNT
Nextion 3.2 display with Model 8 display and latest Nextion driver. After the sleep fix works great, however never see the BER populated. in Display does show correctly ins dashboard.
Re: Model 8 - Observed Issues
Posted: Thu Dec 13, 2018 2:19 am
by K8HIT
Yes there is another thread active in this same group right now. A quick browse and you should find it. Or use search.
Re: Model 8 - Observed Issues
Posted: Sun Jan 27, 2019 2:14 pm
by W1RHS
To change from Celsius to Fahrenheit
Go on SSH in expert mode.
> rpi-rw
>cd /etc
>sudo nano mmdvmhost
Under the [Nextion] section add this line :
DisplayTempInFahrenheit=1
Control O
Control X
Re: Model 8 - Observed Issues
Posted: Fri Feb 22, 2019 2:04 pm
by AK9F
WU0V wrote: ↑Wed Nov 14, 2018 2:27 pm
I have a 3.5 Enhanced Nextion and have some display issues with Model 8 Dashboard version. First let me say I really like the Models 7 and 8 screens. Rob did a fabulous job creating them.
BTW, I only run DMR on my hotspot, so the only screens I see are the Dashboard (idle screen), Flag (RX), and Info screens.
Here are my observations:
1. The Disk Free percentage is always “??”, even though more than 75% of my card is free.
...
Lee
The "disk free" field does work properly if the Nextion Driver is not properly installed. The issue arises if the driver installer is used and the user does not follow the two additional steps required to move the groups.txt and stripped.csv to the /usr/local/etc folder