Nextion screen - not initializind
Nextion screen - not initializind
I have a Pi3B with a Jumbospot and connect to it is my Nextion NX32224K 024_011. I have uploaded a screen using Nextion Editor. The program loads well and when I restart per instructions, I get a read out that states: “initializing wait” and at the bottom of screen it states “ login to nextion” - I wait but nothing happens. Does not log on to IP address as it indicates it is trying to do. PiStar is set to “ nextion/modem/ON7LDS L3”. The radio/moden is: STM32-DVM/MMDVM_HS-Raspberry pi Hat (GPIO). The screen is soldered to the nextion ports on the lower right of the Jumbspot(hat). I an new to this and live in a small town where I’m the only one who has attempted such with nextion. Any help is greatly appreciated.
Re: Nextion screen - not initializind
Did you solder the screen tx to the board rx, and screen rx to board tx?
Sent from my SM-G950U using Tapatalk
Sent from my SM-G950U using Tapatalk
Gene in Belvidere IL
Please don't email me with questions.
That's what these forums are for.
There's much more brainpower collected here
than I have alone.
Please don't email me with questions.
That's what these forums are for.
There's much more brainpower collected here
than I have alone.
Re: Nextion screen - not initializind
Yes - checked it several times. Thanks for suggestion not bad to recheck ones work. Ed
Re: Nextion screen - not initializing
Should read IP Address - loging into network and not nextion in original post. Sorry
Re: Nextion screen - not initializind
After loading the file did you power all the way down (unplug) and remove the SD card.. (only other thing I can think of)
Sent from my SM-G950U using Tapatalk
Sent from my SM-G950U using Tapatalk
Gene in Belvidere IL
Please don't email me with questions.
That's what these forums are for.
There's much more brainpower collected here
than I have alone.
Please don't email me with questions.
That's what these forums are for.
There's much more brainpower collected here
than I have alone.
Re: Nextion screen - not initializind
Did that as well but still indicates IP address: loging into network and hands up at that point. Frustrating to say the least. Going to switch out the hat tomorrow. Who knows?
Re: Nextion screen - not initializind
Try the other ON7LDS levels. One wouldn't show IP on mine, dont remember which..
Sent from my SM-G950U using Tapatalk
Sent from my SM-G950U using Tapatalk
Gene in Belvidere IL
Please don't email me with questions.
That's what these forums are for.
There's much more brainpower collected here
than I have alone.
Please don't email me with questions.
That's what these forums are for.
There's much more brainpower collected here
than I have alone.
Re: Nextion screen - not initializind
Thanks for all reply’s. What I did was change out the hat with a new one and rest everything. It fired right up. Must have been a bad board or something. Sure took time to track down and your suggestions are greatly appreciated in my quest to solve the problem
Re: Nextion screen - not initializind
At least now you know it wasn't operator malfunction
Sent from my SM-G950U using Tapatalk
Sent from my SM-G950U using Tapatalk
Gene in Belvidere IL
Please don't email me with questions.
That's what these forums are for.
There's much more brainpower collected here
than I have alone.
Please don't email me with questions.
That's what these forums are for.
There's much more brainpower collected here
than I have alone.