Brightness Settings

All things relating to the Nextion Screen(s)

Moderator: PD0DIB

Post Reply
Kd9hae
Posts: 1
Joined: Sun Apr 15, 2018 3:38 pm

Brightness Settings

Post by Kd9hae » Mon Apr 16, 2018 2:35 am

Is there a way to disable the brightness setting for a nextion display? I had added buttons to the main screen to adjust the brightness, but when the screen changes I will go back the settings in Pi-Star. Any ideas?

ka1ifq
Posts: 1
Joined: Sun Apr 15, 2018 12:54 pm

Re: Brightness Settings

Post by ka1ifq » Mon Apr 16, 2018 2:04 pm

Check the Nexion System Variables list, may just be difference between using 'dim' or 'dims'.

PD0DIB
Posts: 27
Joined: Wed Apr 11, 2018 1:34 pm
Location: Uden, The Netherlands

Re: Brightness Settings

Post by PD0DIB » Tue Apr 17, 2018 7:24 am

IF you have modified Pi-Star to accept those buttons to execute the brightness function, think they are not 'permanent stored' in the Pi-Star OS, which is a adapted/dedicated version of the original Raspberry Pi OS.
So, if you want to expand your MMDVMHost with this functions, think you have to compile your own MMDVMHost system.
TIP: you can describe your demands, preferable with the code you have used, on the Feature Request in this forum (top of the Home Page) ....
-------------------------------
PD0DIB
Moderator Nextion sub-forum
Playing around with all types of hotspots (simplex & duplex) for DMR and D-Star.
Most of them has a Nextion screen ...

73 de PD0DIB (since 1977 8-) )

Post Reply