Basic textfield numbers, used by MMDVMHost for Nextion

All things relating to the Nextion Screen(s)

Moderator: PD0DIB

Post Reply
PD0DIB
Posts: 27
Joined: Wed Apr 11, 2018 1:34 pm
Location: Uden, The Netherlands

Basic textfield numbers, used by MMDVMHost for Nextion

Post by PD0DIB » Mon Apr 16, 2018 6:48 am

This field numbers are used to display MMDVMHost information on your Nextion display
MMDVM Page (Idle Page)
"t0.txt= callsign, dmrid
"t0.txt= LOCKOUT
"t1.txt= MMDVM IDLE
"t1.txt= ERROR
"t2.txt= date/time
"t3.txt= ipaddress
DStar Page
"t0.txt= type, my1, my2
"t1.txt= your
"t2.txt= reflector
"t3.txt= rssi
"t3.txt= rssiAccum1 / DSTAR_RSSI_COUNT
"t4.txt= ber
"t4.txt= berAccum1 / float(DSTAR_BER_COUNT)
DMR Page
"t0.txt= type, src
"t0.txt= 1 Listening
"t1.txt= group ? "TG" : "", dst
"t2.txt= type, src
"t2.txt= 2 Listening
"t3.txt= group ? "TG" : "", dst
"t4.txt= rssi
"t4.txt= rssiAccum1 / DMR_RSSI_COUNT
"t5.txt= rssi
"t5.txt= rssiAccum2 / DMR_RSSI_COUNT
"t6.txt= ber
"t6.txt= berAccum1 / DMR_BER_COUNT
"t7.txt= ber
"t7.txt= berAccum2 / DMR_BER_COUNT
YSF Page
"t0.txt= type, source
"t1.txt= dest
"t2.txt= origin
"t3.txt= rssi
"t3.txt= rssiAccum1 / YSF_RSSI_COUNT
"t4.txt= ber
"t4.txt= berAccum1 / float(YSF_BER_COUNT)
P25 Page
"t0.txt= type, source
"t1.txt= group ? "TG" : "", dest
"t2.txt= rssi
"t2.txt= rssiAccum1 / P25_RSSI_COUNT
"t3.txt= ber
"t3.txt= berAccum1 / float(P25_BER_COUNT)
-------------------------------
PD0DIB
Moderator Nextion sub-forum
Playing around with all types of hotspots (simplex & duplex) for DMR and D-Star.
Most of them has a Nextion screen ...

73 de PD0DIB (since 1977 8-) )

User avatar
KD9JTV
Posts: 52
Joined: Fri Apr 13, 2018 4:35 am
Location: Martinsville, Indiana, USA
Contact:

Re: Basic textfield numbers, used by MMDVMHost for Nextion

Post by KD9JTV » Sat Apr 21, 2018 10:25 pm

Good list for us newbies. Question: I want to display the Reflector/room when on the MMDVM page of my Nextion 3.2 display. Currently it says, "MMDVM IDLE". I want it to show the reflector/room that I am connected to. I am currently only using YSF. When looking at the pi-star web interface, the "YSF Network" is displayed in the lower left corner of the web page. I want that to display on the MMDVM screen of my Nextion. I don't see a textfield number for it. Any help would be appreciated.

PD0DIB
Posts: 27
Joined: Wed Apr 11, 2018 1:34 pm
Location: Uden, The Netherlands

Re: Basic textfield numbers, used by MMDVMHost for Nextion

Post by PD0DIB » Sun Apr 22, 2018 8:36 am

There are two 'types' of text fields: the one as described in the list and the 'fixed content' in text fields,
The content of the field numbers in the list are generated by MMDVMHost which are send to the text fields in the list and your field isn't in that code (yet)
the 'fixed content' fields can be edit in the Nextion Editor, see tutorial as posted in the Facebook Group for the Nextion.
Since your demand is a variable, you can't do it on a simple way, however... there is a Nextion Driver program which can do that job. That's not for starters, but hey, we all can learn :P how to ...
See for more info about that driver: https://github.com/on7lds/NextionDriver
-------------------------------
PD0DIB
Moderator Nextion sub-forum
Playing around with all types of hotspots (simplex & duplex) for DMR and D-Star.
Most of them has a Nextion screen ...

73 de PD0DIB (since 1977 8-) )

User avatar
PD4MM
Posts: 34
Joined: Thu Apr 19, 2018 6:12 am
Location: Kerkrade
Contact:

Re: Basic textfield numbers, used by MMDVMHost for Nextion

Post by PD4MM » Wed Apr 25, 2018 5:21 am

There is no tx only time ?

PD4MM

Marcel

73's PD4MM QPO

Raspberry Model B+ Rev 1.2 (512MB) / Duplex hotSPOT / Hytera PD785G
Pi-Star DMR ID: 204413501 / PD4MM DMR ID: 2044135

KE2SJ
Posts: 21
Joined: Thu May 17, 2018 5:38 pm

Re: Basic textfield numbers, used by MMDVMHost for Nextion

Post by KE2SJ » Sun May 27, 2018 7:03 pm

Can the driver program somehow be flashed to the Nextion so no laptop is needed? I run my NMDVM jumbospot from a Raspberry Pi.

Thanks from KE2SJ.

Post Reply