What turns the Nextion on and off in MMDVM.ini

All things relating to the Nextion Screen(s)
Post Reply
KA2Y
Posts: 20
Joined: Fri Apr 13, 2018 12:24 pm

What turns the Nextion on and off in MMDVM.ini

Post by KA2Y » Tue Apr 17, 2018 8:55 pm

There are three parts to activating the display - 1. What display 2. Where is the display connected and 3. Which format.

I can find the settings in MMDVM.ini for 2 and 3, but not for #1. What parameter activates the presence of the Nextion display?

I understand Modem and Nextion settings in MMDVM.ini. This problem is occurring on Stretch Raspian on a Raspberry Pi 3B+.

PD0DIB
Posts: 30
Joined: Wed Apr 11, 2018 1:34 pm
Location: Uden, The Netherlands

Re: What turns the Nextion on and off in MMDVM.ini

Post by PD0DIB » Wed Apr 18, 2018 10:24 am

As in the FB-Group already asnwered: The Raspberry 3+ (Stretch) isn't handling correct the USB status.
That is the reason Pi-Star is still bèta for RPi3+ / Stretch
-------------------------------
PD0DIB
Moderator Nextion sub-forum
Playing around with all types of hotspots (simplex & duplex) for DMR and D-Star.
Most of them has a Nextion screen ...

73 de PD0DIB (since 1977 8-) )

KA2Y
Posts: 20
Joined: Fri Apr 13, 2018 12:24 pm

Re: What turns the Nextion on and off in MMDVM.ini

Post by KA2Y » Wed Apr 18, 2018 6:53 pm

Solved! I was changing the wrong MMDVM.ini file. /dev/ttyUSB0 is where it is.

Post Reply