Hello everyone
Is it possible to connect a Nextion display to an ORANGE PI ZERO
if so which pin layout should I use ?
thanks in advance !!!
Dirk ON5CT SYSOP: ON0SNW and ON0WL
Nextion display on Orange Pi Zero
Re: Nextion display on Orange Pi Zero
I dont see why not - the GPIO is much the same as the raspberry pi (although for reasons that I dont understand Orange Pi seems to be inverted....)
The UART is there to drive a Nextion so the PIN to PIN connections are the same, the placement of the pins is just not quite the same on that board.
Hope that makes some sense.
The UART is there to drive a Nextion so the PIN to PIN connections are the same, the placement of the pins is just not quite the same on that board.
Hope that makes some sense.