Anyone know where i can get another Plug/cord for the screen? It's the one that comes in the box with the screen. I took mine and cut the ends off and soldiered it to the board before i found out you need to connect to the computer to program it!
Or...
Can it be programmed through the MMDVM board? There is a USB plug on the board.
Thanks,
Rob
Need Nextion power /data cord.
Re: Need Nextion power /data cord.
Been a while since I set up a nextion, but both of mine were set up using an SD card...
Copy your template to the sd card, put the SD card in the slot on the nextion, power up, it copies it over. Power down, remove the SD card. and power back up with your new template..
Copy your template to the sd card, put the SD card in the slot on the nextion, power up, it copies it over. Power down, remove the SD card. and power back up with your new template..
Gene in Belvidere IL
Please don't email me with questions.
That's what these forums are for.
There's much more brainpower collected here
than I have alone.
Please don't email me with questions.
That's what these forums are for.
There's much more brainpower collected here
than I have alone.
Re: Need Nextion power /data cord.
The cable plug is a JST XH2.54:
https://www.amazon.com/gp/product/B01IZAHR5M/
https://www.amazon.com/gp/product/B01IZAHR5M/
73, Toshen, KE0FHS
Playing with Pi-Star (unofficial notes about setting up and using Pi-Star):
https://amateurradionotes.com/pi-star.htm
Playing with Pi-Star (unofficial notes about setting up and using Pi-Star):
https://amateurradionotes.com/pi-star.htm
Re: Need Nextion power /data cord.
I always set up my Nextion display via the mico USB. Just load TFT file into formatted micro SD card plug in and power up with no inputs.