Page 2 of 2

Re: NextionDriver requires configuration apply changes after every shutdown or reboot

Posted: Wed Aug 14, 2019 9:44 pm
by WU1U
I hope someone can confirm or deny operation like this on another Pi 0. If not the next time I need something from Adafruit I will throw in the $10 for a new zero. Regardless, thanks for all your help. I learned a lot working through this and that is hard for a 73 year old accountant type.

Re: NextionDriver requires configuration apply changes after every shutdown or reboot

Posted: Thu Aug 15, 2019 7:07 pm
by WU1U
Neither change had any impact on the performance. The results are still stalling at NextionDriver until 'Apply Changes' is used on the config page. What continues to be noticeable is the very slow response of the Pi Zero under V4.1.0 RC2. The web interface often times out waiting for reboots or apply change actions.

Re: NextionDriver requires configuration apply changes after every shutdown or reboot

Posted: Fri Aug 16, 2019 4:40 am
by WU1U
Thanks for all your effort on this. I learned a lot doing the tests and I am happy I was not messing something up that neither of us realized. At least I am not imaging the problem. :)

Re: NextionDriver requires configuration apply changes after every shutdown or reboot

Posted: Fri Aug 16, 2019 11:46 pm
by WU1U
Thanks. I will wait for the code to be updated. Glad you figured it out. I did finally find the Pi 3 I thought I owned so I will get it set up with that but at least now I know how to use the Zumspot modem pins and NextionDriver saving me having the usb/ttl adapter hanging off the pi.