Page 1 of 1
BER and RSSI readings reversed on Nextion with JumboSpot in DStar mode
Posted: Sun May 13, 2018 10:55 pm
by K2RHK
Here’s a quirk! Thanks to help on this forum my Nextion screen on a Pi2/Jumbospot in DMR mode now displays RSSI readings as well as BER correctly. However, in DStar mode the readings are reversed. On the Dashboard they’re OK but on the Nextion the RSSI box will display, say, 0.00% while the BER box will display -47dBm. I’ve tried this on two separate screens with the same results. Can anyone figure this out?
Re: BER and RSSI readings reversed on Nextion with JumboSpot in DStar mode
Posted: Sun May 13, 2018 11:28 pm
by n9mxq
I had this issue on my 2.8 with the TS and TG lines. Just swapped values (X. Y. W. H) from one to the other and everything lined up.
Re: BER and RSSI readings reversed on Nextion with JumboSpot in DStar mode
Posted: Sun May 13, 2018 11:50 pm
by K2RHK
Thanks, I found that it was an error in the two screens by the same designer. I tried the American flag screen and the readings are correct there.
Re: BER and RSSI readings reversed on Nextion with JumboSpot in DStar mode
Posted: Sun May 13, 2018 11:54 pm
by n9mxq
Glad ya got it fixed. The American flag screen was the one that had TG and TS reversed for me..
Sent from my SM-G950U using Tapatalk
Re: BER and RSSI readings reversed on Nextion with JumboSpot in DStar mode
Posted: Wed May 16, 2018 11:38 am
by PD0DIB
IN the Model 5 screens (PD0DIB) I've swapped BER and RSSI
Corrected in the latest versions and posted in the files section at the Nextion FB Group.