PD0DIB / NX3224T024 missing t21/t22/t23

All things relating to the Nextion Screen(s)
Post Reply
G7OMN
Posts: 12
Joined: Mon Apr 05, 2021 8:46 pm

PD0DIB / NX3224T024 missing t21/t22/t23

Post by G7OMN »

I run Pi-Star on a Pi 2 Model B, with generic MMDVM HAT (12MHz).
I have a NX3224T024 with a modified NX3224T024_Model 10_2.4inch_SMPLX_Basic_v1.05.HMI loaded.
So, the mod is just the mode pages removed for the modes i will not use, to bring it down to a size so it will load into the display (Start, MMDVM, DStar and DMR are retained)
The display is driven from the headers on the modem.

PiStar has the ON7LDS driver installed and it is configured for ON7LDS L3 driver.

Rob PD0DIB notes that fields t21 : CPU frequency, t22 : CPU loadavg 1 min & t23 : Disk free % require the NextionDriver by ON7LDS, however these fields are blank, as are t8, t14, t15, t16 & t17 in the DMR screen.
If I choose G4KLX or ON7LDS L2 options, i have less information displayed as expected.

I'm not really sure what should be visible, as i can't find any example images of this layout in use.
(I've attached a few images of what I am seeing)


Anyone got any idea as to why the fields are not populated?
Reload the driver perhaps?
Is all the CPU/disk free data available on a Pi2B?
Jon
G7OMN
G7OMN
Posts: 12
Joined: Mon Apr 05, 2021 8:46 pm

Re: PD0DIB / NX3224T024 missing t21/t22/t23

Post by G7OMN »

Thanks.
I went back to the drawing board. I guess i missed the first line of your into and hadn't started with a clean unfettered install.
I went through that and after checking PD0DIB's notes again i noted the option for checking the install, this verified the driver wasn't actually running, even though it had updated from v1.7 to 1.9, so i forced another install, ignored the warnings about space in the tmp folder, rebooted and that fixed it. (so I don't need to go around again and reattach the missing images from the first post now either! )
Jon
G7OMN
N0KYN
Posts: 1
Joined: Tue Jul 02, 2019 7:48 pm

Re: PD0DIB / NX3224T024 missing t21/t22/t23

Post by N0KYN »

Greetings,
I am having the same issues with not seeing Cycles,Load,Disk Free, I also do not see Rssi and Ber. I am new to this and have done everything I can think of. Specs are Rasp-pi 3+, Dual hat MMDVM board, running PD0DIB build 11092020-03. The nexition board is a NX3224K024-011. Any help would be appreciated.

Thanks,
Rick
Post Reply