Page 3 of 3
Re: Problem Installing ON7LDS Nextion Driver
Posted: Fri Feb 22, 2019 11:19 pm
by M1DNS
Run an update
When it's completed reboot.
There's been some progress made last evening in the RW/RO scenario.
Andrew M1DNS, (Mod)
Problem getting ON7LDS Nextion Driver to run
Posted: Sat Mar 16, 2019 5:07 pm
by DJ5UW
I would need help with the installation of the Nextion driver via github on pistar 3.4.17 and a dual HS Hat Board.
Whatever I try, I cannot get the Nextion Driver process to run. It always shows "Nextion Driver not running" everything else seems to be ok.
How can I get the driver to run? Tried to reinstall/install the drivers from ON7LDS githhub repository, no luck.
The display itself works fine, connected to the modem Port on the HS Duplex Hat Board and also via USB but as soon as I try to activate the Nextion Driver, ist stops working.
Problem Installing ON7LDS Nextion Driver - Solved
Posted: Sun Mar 17, 2019 1:13 pm
by DJ5UW
Problem solved.
The Nextion Drivers Installer from ON7LDS is apparently incompatible with Pistar 3.4.17
Installed it on three different Pistar 4 RC3 installations without problems. Runs on a Dual HS Hat off of the modem pins on the board and on DVMEGA Boards using a USB - Serial Adapter. Shows CPU temp, CPU Load etc. Touchscreen is enabled and the display can reboot/restart the Hotspot directly without a PC just by pressing a virtual button