OLED with Rpi3 & Zumspot USB

All things relating to OLED Screen(s)
Post Reply
K3SZ
Posts: 5
Joined: Tue May 07, 2019 6:50 pm

OLED with Rpi3 & Zumspot USB

Post by K3SZ »

I realize this is not a typical setup but I had terrible performance with a Win10 PC and the Zumspot USB. I plugged the device into a Pi-Star imaged RPi3 and it works great. My question is will the usual 1.3" OLED display receive and display data through the GPIO connections on the RPi3 if I tell Pi-Star there is a display -- the same config as if it were the standard Zumspot & PiZero (which I know does work). I don't have another OLED to test this thus the question I pose here.
K3SZ
Posts: 5
Joined: Tue May 07, 2019 6:50 pm

Re: OLED with Rpi3 & Zumspot USB

Post by K3SZ »

@KE7FNS,

That makes sense. Realize now GPIO is not used for this.

Thanks!
Post Reply