OLED 1.3 Screen on HRO built ZUMSPOT IP addr not updated on OLED screen
Posted: Mon Dec 30, 2019 12:46 am
I have an HRO pre-built ZUMSPOT running on a pi-ZERO W with two wlans configured. The first is my phone and the second is my home wifi (different names, passwords, and resulting IP ranges).
If I am on the phone network and bring the unit into the home turning off the phone's power it switches over to the home wifi without a problem and the website for pi-star updates correctly but he wlan0 notation on the OLED screen remains showing the IP address of the phone and does not update to the new IP address as shown in the website even if the phone is completely off.
Pi-Star:3.4.17 / Dashboard: 20191220
OLED shows
wlan0: 172.20.10.2
Wireless Configuration section of configuration page shows
Interface Name : wlan0
Interface Status : Interface is up
IP Address : 172.16.0.115
Subnet Mask : 255.255.255.0
Mac Address : b8:27:eb:2b:98:47
If I am on the phone network and bring the unit into the home turning off the phone's power it switches over to the home wifi without a problem and the website for pi-star updates correctly but he wlan0 notation on the OLED screen remains showing the IP address of the phone and does not update to the new IP address as shown in the website even if the phone is completely off.
Pi-Star:3.4.17 / Dashboard: 20191220
OLED shows
wlan0: 172.20.10.2
Wireless Configuration section of configuration page shows
Interface Name : wlan0
Interface Status : Interface is up
IP Address : 172.16.0.115
Subnet Mask : 255.255.255.0
Mac Address : b8:27:eb:2b:98:47