Dual Hat RF loop

Suggest new features here
Post Reply
iw8eln
Posts: 14
Joined: Tue Oct 23, 2018 6:08 pm

Dual Hat RF loop

Post by iw8eln »

If you select Duplex and use a Dual_Hat, by default RX and TX have the same frequency and generate an RF loop.
Change one of the two frequencies by setting a shift of at least 5MHz
KE7FNS
Posts: 1664
Joined: Wed Apr 17, 2019 11:11 pm

Re: Dual Hat RF loop

Post by KE7FNS »

iw8eln wrote: Tue Apr 06, 2021 8:42 pm If you select Duplex and use a Dual_Hat, by default RX and TX have the same frequency and generate an RF loop.
Change one of the two frequencies by setting a shift of at least 5MHz
It is up to the user to specify the two frequencies needed for proper operation.

What you are requesting only works for for half of the 70cm operation (higher 70cm frequencies use a - 5Mhz offset). If also fails in 2m, 1.25m, and 33cm operation because they do not use a 5Mhz offset.
If someones previous actions are any indication of their future actions, then I predict the deletion and removal of access will happen at any moment. 7-11-2020.

"07/13/20 This Website Has Been Taken Down" ... again :lol:
Post Reply