Cannot calibrate ZUMspot to a lower or decent BER percentage

Help and support for ZUMSpot Hardware
Post Reply
KC4GYB
Posts: 2
Joined: Tue Jul 03, 2018 3:21 pm

Cannot calibrate ZUMspot to a lower or decent BER percentage

Post by KC4GYB » Mon May 06, 2019 6:25 pm

Hi,
I have two (2) ZUMspot which I use with my TYT's-MD380/390 radios and my Alinco DJ-MD5TGP Dual Band DMR and the BER numbers are always 0.0% at the most 0.1%, in other words Perfect!!

I just bought a TYT MD-430 UHF-DMR and I cannot adjust a good BER (Bit Error Rate) the lowest I get is 3.9% to 4.2% always on the orange zone never on the green zone.

This happens on my two (2) ZUMspots I own.

Please, does anyone knows what might be causing this high BER number?

Thanks for all your support!
KC4GYB/Marcelo/73’s

Post Reply