Current Firmware version?

Help and support for ZUMSpot Hardware
Post Reply
KD2KBU
Posts: 10
Joined: Wed Apr 11, 2018 2:48 pm

Current Firmware version?

Post by KD2KBU » Tue May 01, 2018 2:52 pm

Hello, All-

I am running a ZUMspot on a Raspberry Pi Zero W. I have performed the

sudo pistar-zumspotflash rpi

and have version 1.3.3 Is this the current version? I have seen mention elsewhere of 1.3.4 but have not been able to verify. Nor does that version load when performing the FLASH command mentioned above.

Thanks for any help
John
KD2KBU

User avatar
MW0MWZ
Site Admin
Posts: 916
Joined: Wed Apr 04, 2018 9:15 pm
Location: Wales, UK
Contact:

Re: Current Firmware version?

Post by MW0MWZ » Tue May 01, 2018 5:02 pm

This is the up-stream resource for ZumSpot firmware;
https://github.com/juribeparada/MMDVM_HS/releases

As you can see 1.3.3 is the current build.
Andy

73 de MW0MWZ
http://pistar.uk

n5amd
Posts: 30
Joined: Wed Apr 11, 2018 9:05 pm
Location: San Antonio Texas
Contact:

Re: Current Firmware version?

Post by n5amd » Thu Jul 12, 2018 1:39 pm

Will this be the same for the Zum-Radio MMDVM with the pigtail?

My zum-radio board 0.9 might be in need of a firmware upgrade, but since they went out of business Im not sure if there is really one available or if its based on just the MMDVM firmware alone.
Ben
N5AMD
www.n5amd.com

KB8AOB
Posts: 20
Joined: Tue May 08, 2018 3:42 am
Location: Buckhannon WV USA

Re: Current Firmware version?

Post by KB8AOB » Fri Jul 13, 2018 1:27 am

But now my dashboard says 1.4.1

Image
Attachments
Screenshot_2018-07-13 KB8AOB - Digital Voice Dashboard.png
Screenshot_2018-07-13 KB8AOB - Digital Voice Dashboard.png (6.16 KiB) Viewed 1192 times

Post Reply