zumspot-RSP 3.5 from HRO

Help and support for ZUMSpot Hardware
Post Reply
W1WKW
Posts: 20
Joined: Wed Nov 18, 2020 8:06 pm

zumspot-RSP 3.5 from HRO

Post by W1WKW »

hope this is the right area of your board for this newb question:

when i start up my hotspot "zumspot-rsp 3.5" i got from HRO, naturally it displays my call, then it displays 1234567 , which is listed in the configuration as the "CCS7/DMR ID:" my zumspot is only set to be used on Fusion, I have tried to leave the CCS7/DMR ID: box blank but it reverts back to 1234567, is this normal? what is it ?

another words, when the unit starts it says :

W1WKW/1234567


oh, and while I have your attention i may as well ask another newbie question, what does the "N" signify when I see someone is talking and their call is displayed, example, there is a ham talking away and on my zumspot display it lists - N W9EXAMPLE Does the "N" signify Node ?
KE7FNS
Pi-Star Team
Posts: 1794
Joined: Wed Apr 17, 2019 11:11 pm

Re: zumspot-RSP 3.5 from HRO

Post by KE7FNS »

W1WKW wrote: Sun Nov 22, 2020 4:25 am
when i start up my hotspot "zumspot-rsp 3.5" i got from HRO, naturally it displays my call, then it displays 1234567 , which is listed in the configuration as the "CCS7/DMR ID:" my zumspot is only set to be used on Fusion, I have tried to leave the CCS7/DMR ID: box blank but it reverts back to 1234567, is this normal? what is it ?

another words, when the unit starts it says :

W1WKW/1234567
Its a DMR ID number. If cannot be blank. Either ignore it, or register for a DMR ID and then enter the one assigned to you.
https://www.radioid.net/register
W1WKW wrote: Sun Nov 22, 2020 4:25 am oh, and while I have your attention i may as well ask another newbie question, what does the "N" signify when I see someone is talking and their call is displayed, example, there is a ham talking away and on my zumspot display it lists - N W9EXAMPLE Does the "N" signify Node ?
N stands for network. It can also display a R for RF. Its where the source originated from.

The number is the time slot.
If someones previous actions are any indication of their future actions, then I predict the deletion and removal of access will happen at any moment. 7-11-2020.

"07/13/20 This Website Has Been Taken Down" ... again :lol:
M1DNS
Pi-Star Team
Posts: 899
Joined: Thu Apr 05, 2018 5:30 am

Re: zumspot-RSP 3.5 from HRO

Post by M1DNS »


W1WKW wrote: ...


oh, and while I have your attention i may as well ask another newbie question, what does the "N" signify when I see someone is talking and their call is displayed, example, there is a ham talking away and on my zumspot display it lists - N W9EXAMPLE Does the "N" signify Node ?

In wires X. Yes N represents Node
as R does for Repeater YOU also have
G for gateway, but that one is less seen.

If your on a YSF which runs into a wires X bridge thats what your most likly seeing.

A.



Sent from my SM-G935F using Tapatalk

Andrew M1DNS.
Pi-star Admin Team.
W1WKW
Posts: 20
Joined: Wed Nov 18, 2020 8:06 pm

Re: zumspot-RSP 3.5 from HRO

Post by W1WKW »

ty :D
Post Reply