ZUMSpot boards with Type6 Screens / Tearing / Scrolling

Help and support for ZUMSpot Hardware
Post Reply
User avatar
MW0MWZ
Site Admin
Posts: 1505
Joined: Wed Apr 04, 2018 9:15 pm
Location: Wales, UK
Contact:

ZUMSpot boards with Type6 Screens / Tearing / Scrolling

Post by MW0MWZ »

ZUMSpot boards with issues with scrolling / screen tearing.

This is caused by some screens not handling the screen scroll command, its not supported on these.
The screen will either just not scroll, or will tear - the main config page resets scrolling to off for Type6 boards to reduce the chances that you will run into this issue (as of 20210207).
Andy

73 de MW0MWZ
http://pistar.uk
Post Reply