ZUMSpot boards with Type6 Screens / Tearing / Scrolling
Posted: Mon Feb 08, 2021 12:59 pm
ZUMSpot boards with issues with scrolling / screen tearing.
This is caused by some screens not handling the screen scroll command, its not supported on these.
The screen will either just not scroll, or will tear - the main config page resets scrolling to off for Type6 boards to reduce the chances that you will run into this issue (as of 20210207).
This is caused by some screens not handling the screen scroll command, its not supported on these.
The screen will either just not scroll, or will tear - the main config page resets scrolling to off for Type6 boards to reduce the chances that you will run into this issue (as of 20210207).