After much fooling around yesterday I was able to get into the Pi-star dashboard. Then I put in the USID and PW, pi-star, raspberry and got into config
I changed the data to my call sign but was careful not to change the PW.
Since that one time the Dashboard will not accept the U/TXSID and PW.
Does anyone have any idea what to do?
I am about to put this thing up on eBay.
I can see the two little green lights flashing between DMR and D-Star which were my choices.
I changed the RX/TX freq to 433.450, which is an unused simples freq on my TYT-390.
When I key up the radio the little green lights stop flashing and stay on DMR for a while.
I have never heard any audio back, which makes me think I have some config wrong. But not being able to get in and fiddle around to try to diagnose the problem is making me insane.
Any help would be appreciated.
Dash board Pass word
Re: Dash board Pass word
Where exactly did you change the data to your call sign?I changed the data to my call sign but was careful not to change the PW.
- The user name for signing into Pi-Star Admin is always pi-star. At this time, the user name can't be changed.
- The password used for signing into Pi-Star Admin (by default, raspberry) depends on what you enter in the Remote Access Password section. You can change this password.
- The URL for accessing Pi-Star via a browser uses the Hostname (by default, pi-star: http://pi-star/ for Windows and http://pi-star.local/ for macOS etc.). You can change the Hostname in the General Configuration section.
73, Toshen, KE0FHS
Playing with Pi-Star (unofficial notes about setting up and using Pi-Star):
https://amateurradionotes.com/pi-star.htm
Playing with Pi-Star (unofficial notes about setting up and using Pi-Star):
https://amateurradionotes.com/pi-star.htm
Re: Dash board Pass word
I reformatted the SD card and re-etched it. Made a new wpa_ file and now I can connect to the Zumspot.