forum.pistar.uk

Is there an equivalent for GETIP with DMR or any of the other modes?

Any plans to add additional capabilities? Being able to get an audio or text report on what network(s) you’re connected to, talkgroups/reflectors you’re connected to would be great!

Thanks again for everything you do!


Sent from my iPhone using Tapatalk Pro

MW0MWZ wrote: ↑Sat Jan 26, 2019 9:45 pm So you do need to be up to date, and you do need to add the lines to the remote config (as posted above)
Set the UR field to match what you set in the remote config and it should work.

The answer is Text message and ONLY works in D-Star.

That's exactly what I did, but I don't get a text message with the IP address. 8BALL worked. Is the message 8BALL returns what you consider a text message?

I’ll test this on V4 build too but no reason for me to think it shouldn’t work...

My D-Star hotspot is running on V3.4 at the moment....


Sent from my iPhone using Tapatalk

Found a bug in the remote code, the text transmit binary name had changed in the new ircDDBGateway builds - modified the Pi-Star remote process to be able to find it - next time you update your Pi-Star v4 builds they will get textual answers from D-Star commands (so GETIP and 8BALL etc will all work properly and the reboot/shutdown etc will all give you text feedback again.

KE0FHS wrote: ↑Tue Jan 22, 2019 10:57 pm... I've been able to successfully use SHUTDOWN and REBOOTPI, but not GETIP. Thanks.

Since the RF remote commands only work in D-Star per Andy's post, and SHUTDOWN/REBOOTPI both work and have 8 characters, one wonders whether GETIP should be padded with 3 blank spaces?

w7efs wrote: ↑Sun Jan 27, 2019 6:34 pm

KE0FHS wrote: ↑Tue Jan 22, 2019 10:57 pm... I've been able to successfully use SHUTDOWN and REBOOTPI, but not GETIP. Thanks.

Since the RF remote commands only work in D-Star per Andy's post, and SHUTDOWN/REBOOTPI both work and have 8 characters, one wonders whether GETIP should be padded with 3 blank spaces?

That's a good idea, but I can verify what Andy posted: it's actually working now since this morning's update.

Yep.
Now working here also.

Andrew M1DNS, (Mod)

I have GETIP put in the UR field on my ID-5100A


I am running Pi-Star:4.0.0-RC3 / Dashboard:20190127
I have getip=GETIP in the PiStar-Remote field under [d-star]

I am still not getting the text showing the IP. I must be doing something wrong.

w7efs wrote: ↑Sun Jan 27, 2019 6:34 pm

KE0FHS wrote: ↑Tue Jan 22, 2019 10:57 pm... I've been able to successfully use SHUTDOWN and REBOOTPI, but not GETIP. Thanks.

Since the RF remote commands only work in D-Star per Andy's post, and SHUTDOWN/REBOOTPI both work and have 8 characters, one wonders whether GETIP should be padded with 3 blank spaces?

The text feedback was not working on Pi-Star 4.x at all - since the IP address come back as text (as does 8BALL) neither were doing anything.
However that is now fixed up, the other commands happen to be 8 Chars, but it should not matter.

N7HHI wrote: ↑Sun Jan 27, 2019 9:37 pm 20190127_150735.jpg
I have GETIP put in the UR field on my ID-5100A



2019-01-27Pi-StarDashboardGETIP.jpg
I am running Pi-Star:4.0.0-RC3 / Dashboard:20190127
I have getip=GETIP in the PiStar-Remote field under [d-star]

I am still not getting the text showing the IP. I must be doing something wrong.

Make sure you unlink from any reflector you might have been listening too - set the UR field to "GETIP" and press the PTT - it might take up to 30 secs to answer, you will only get the IP back as text, so watch the radio...