TX Audio stops

General support for the Pi-Star System
Post Reply
g0lgj
Posts: 2
Joined: Wed Dec 19, 2018 12:36 am

TX Audio stops

Post by g0lgj » Fri Mar 29, 2019 9:14 pm

Hi using latest pi-star image and STM32-dvm v2a board.
When using YSF and D-STAR the audio cuts out after approx 55 sec
Radio / pi-star and DVM board stays in TX.
When the QSO drops all above drop as normal and process starts again.
Timeout is set to 240

Any other suggestions.
Mark G0LGJ

g0lgj
Posts: 2
Joined: Wed Dec 19, 2018 12:36 am

Re: TX Audio stops

Post by g0lgj » Sun Mar 31, 2019 12:57 pm

All ok after getting scope out and seeing Audio is still being passed to Radio, found TX Timer set in Radio....
Now to the DMR setup...
Mark

Post Reply