Upgrade 4.0 to 4.1

[oz1cbk]

Hi.
Do I have to install ON7LDS Nextion driver when use 4.x.x RCx ?
I use new image for 4.1.0.RC2
I think it worked on 4.0.0 RC4, but not on 4.1.0 RC2
Some of the fields are empty now in 4.1.0.RC2

And I still have to copy the Wifi file to the SD card ? (just to be shure)

[MW0MWZ]

Backup the config, write the new card, drop the config on the "boot" volume that shows up, it will configure it's self on boot up
Simple...

Nextion driver is not loaded on Pi-Star out of the box, I dont think I ever included it - although I might start to at some point.

[oz1cbk]

Thanks Andy.
I use the config manual after it was coming up. And I use Wifi file in the start (the old way)

I think I will try the new way, just to se if that works

[oz1cbk]

Backup the config, write the new card, drop the config on the "boot" volume that shows up, it will configure it's self on boot up
Simple...

Nextion driver is not loaded on Pi-Star out of the box, I dont think I ever included it - although I might start to at some point.

It works fine. Then I have to find the display drive. Thanks. Its really easy now

[oz1cbk]

From GitHub:
log in to your Pi-Star with SSH
or go to your dashboard -> configuration -> expert -> SSH access
go to the /tmp directory
cd /tmp
get the software
git clone https://github.com/on7lds/NextionDriverInstaller.git
go !
sudo NextionDriverInstaller/install.sh

And it works also I don't think Pi-Star is getting much easier to install.

THANK YOU ANDY FOR EXELENT WORK.