When running mmdvmcal, when it starts, I see the following lines:
MMDVMHOST: No process found
MMDVMHost_NoOLED: No process found
MMDVMHost_Adafruit: No process found.
Then when activating the transmitter, I get the following error:
Received a NAK to the CAL_DATA command from the modem: 2
Happening to all 4 of my hotspots, so I'd say it's an issue.
Pi-star 4.1 MMDVMCAL is broken.
Pi-star 4.1 MMDVMCAL is broken.
AntiSquid Disclaimer: All messages posted are personal opinion only and may not constitute fact.
Re: Pi-star 4.1 MMDVMCAL is broken.
I'm unable to replicate your issue! I tried on three hotspots (jumbo, zum & duplex) and mmdvmcal is working. What make or mmdvm hat are you using?
Sent from my Pixel 2 XL using Tapatalk
Sent from my Pixel 2 XL using Tapatalk
Re: Pi-star 4.1 MMDVMCAL is broken.
I've changed the frequency to my transmit freq. I've also left it at the default. Neither work.
Sent from my SAMSUNG-SM-G920A using Tapatalk
Sent from my SAMSUNG-SM-G920A using Tapatalk
AntiSquid Disclaimer: All messages posted are personal opinion only and may not constitute fact.
Re: Pi-star 4.1 MMDVMCAL is broken.
Uh. Yes
Sent from my SAMSUNG-SM-G920A using Tapatalk
AntiSquid Disclaimer: All messages posted are personal opinion only and may not constitute fact.
Re: Pi-star 4.1 MMDVMCAL is broken.
Can you tell us more about what modem you have, that may shed some light on it...
Re: Pi-star 4.1 MMDVMCAL is broken.
Hi Andy,
Well, all 4 are China spots. 3 simplex ones and one duplex.
AntiSquid Disclaimer: All messages posted are personal opinion only and may not constitute fact.
Re: Pi-star 4.1 MMDVMCAL is broken.
Is the firmware up to date on the board(s) ?
Re: Pi-star 4.1 MMDVMCAL is broken.
Yes totally up to date
AntiSquid Disclaimer: All messages posted are personal opinion only and may not constitute fact.
Re: Pi-star 4.1 MMDVMCAL is broken.
Well the error occurs with *all* my hotspots.(I have 4 now in service) mmdvmcal worked fine on my first two *before* the update to 4.1. (the other 2 were either purchased after 4.1 or I have never needed to use mmdvmcal) I only have one duplex board, the rest are the simplex jumbospots.
AntiSquid Disclaimer: All messages posted are personal opinion only and may not constitute fact.