Hello,
How do I disable reporting of my hotspot’s location to the APRS network?
Thanks
Disable APRS Hotspot Reporting
Re: Disable APRS Hotspot Reporting
See this note by KH6HZ sharing a hint by Gene N9MXQ:
viewtopic.php?f=5&t=557&p=2126#p2119
In addition: There's also an APRS-related setting in the Expert Editor > ircDDBgateway Quick Editor: aprsEnabled (0 = disabled; 1 = enabled).
viewtopic.php?f=5&t=557&p=2126#p2119
In addition: There's also an APRS-related setting in the Expert Editor > ircDDBgateway Quick Editor: aprsEnabled (0 = disabled; 1 = enabled).
73, Toshen, KE0FHS
Playing with Pi-Star (unofficial notes about setting up and using Pi-Star):
https://amateurradionotes.com/pi-star.htm
Playing with Pi-Star (unofficial notes about setting up and using Pi-Star):
https://amateurradionotes.com/pi-star.htm
Re: Disable APRS Hotspot Reporting
There's also a setting for C4FM to enable aprs reporting too. As well as NXDN. But obviously it depends on what modes you use (or have active)
Sent from my Pixel 2 XL using Tapatalk
Sent from my Pixel 2 XL using Tapatalk
Re: Disable APRS Hotspot Reporting
I tried each solution one at a time...
Setting the aprsEnabled setting to 0 in Pi-star did not work (as also reported by users in the other thread).
Putting NOAPRS in the “Priority” field in your hotspot settings on Brandmeister did work.
Note: My hotspot is DMR only (Brandmeister network obviously)
Thanks for the help
Setting the aprsEnabled setting to 0 in Pi-star did not work (as also reported by users in the other thread).
Putting NOAPRS in the “Priority” field in your hotspot settings on Brandmeister did work.
Note: My hotspot is DMR only (Brandmeister network obviously)
Thanks for the help
Re: Disable APRS Hotspot Reporting
It depends on where the update comes from, there is no option in Pi-Star to manage what BM does for example.