Hi all, I just created a disc-image and rebooted the RP. It comes up with a Log-In screen asking for "Login" and after entering my callsign and pressing Enter, It goes to "Password".
When i try to type the password, NOTHING happens (no text appears). I press Enter again and I am then able to start typing but I quickly get an "Incorrect Login" warning.
Help!!
Login Problem on B3+
Re: Login Problem on B3+
Thanks Jason, I'll do that read up you recommended.
Re: Login Problem on B3+
Got everything up and running with the Pi and DVAP and set default reflector to Charlie 30. I could hear people and see their callsigns on the radio screen and on the Pi-Star Admin panel, but I could not transmit.
If I key-up, the radio simply reads back my Callsign. Maybe I'm just too dumb for all this, LOL.
My Kenwoord D74 works perfectly when using the DVAP on PC.
Regards, Tom.
If I key-up, the radio simply reads back my Callsign. Maybe I'm just too dumb for all this, LOL.
My Kenwoord D74 works perfectly when using the DVAP on PC.
Regards, Tom.
Re: Login Problem on B3+
If you'll be using only D-STAR mode, for example, with older hardware like the DVAP or DVRPTR, select DStarRepeater as your Controller Software.
73, Toshen, KE0FHS
Playing with Pi-Star (unofficial notes about setting up and using Pi-Star):
https://amateurradionotes.com/pi-star.htm
Playing with Pi-Star (unofficial notes about setting up and using Pi-Star):
https://amateurradionotes.com/pi-star.htm