forum.pistar.uk

On a pi0 Jumbospot, I had an error moving to rc5 but I don't know if is significant. This occurred on both a 16gb and a 32gb card (both SanDisk class 10). What if anything, am I doing wrong? From the Expert menu...
----
Starting upgrade, please wait...
Detected Pi-Star 4.1.0-RC4 running on RPi hardware, attached to stm32dvm modem...
cp: error writing '/var/lib/dhcpcd5/resolv.conf': No space left on device
Upgraded from 4.1.0-RC4 to 4.1.0-RC5...
Sleeping a few seconds before making the disk Read-Only...
Finished
----
Thanks in advance.

All 4 of mine showed the out of space error also, all 4 working fine anyways.. 2 of em have 64 gig cards, 2 have 16 gig..

I'm kinda curious why it popped up also..

This may have been the whole reason behind the upgrade to RC5. Andy's comment in the code:
# Fix up some minor issues with resolvconf's config

Thanks to Toshen's suggestion of running the sudo pistar-expand, it cleared the problem. Rerunning upgrade? No error message. Good to go. Memo to self. Get up to speed on some linux and sudo commands.

Yes, I can confirm that. Two RPi Zero W, both on 4.1.0-RC5, dashboard 20190905, kernel 4.19.66+, modem FW 1.4.17.

Yes, I can also confirm that. Running a RPI 3b+ and a jumbospot with a 16gig sd card vn 4.1.0 RC5.dashboard 20190905, kernel 4.19.66+, modem FW 1.4.17.