Update/Upgrade fails with error...

General support for the Pi-Star System
Post Reply
G8OGJ
Posts: 65
Joined: Mon May 06, 2019 8:13 pm
Location: Matlock
Contact:

Update/Upgrade fails with error...

Post by G8OGJ »

Folks,

I get this when trying to update my pi-star from the internal web page:

Fatal: unable to access 'https://github.com/AndyTaylorTweet/Pi-S ... aries.git/': Could not resolve host: github.com

The pi-star system is running alright so I don't believe that this is a DNS error (at least at my end). Any thoughts as to the cause? The same happened yesterday.

Regards,

Ian
Amateur Radio Station G8OGJ
User avatar
KE0FHS
Posts: 1122
Joined: Wed Apr 11, 2018 8:40 pm
Location: Colorado, USA
Contact:

Re: Update/Upgrade fails with error...

Post by KE0FHS »

I experience this once in awhile when performing a Pi-Star Update, but not with a Pi-Star Upgrade. I've also experienced this occasionally when running Raspbian updates. My guess is that it's an issue with GitHub or the Raspbian servers. When it happens, I simply let some time go by (a few hours or a day or two) and then try again, and it has always worked the second time.
73, Toshen, KE0FHS
Playing with Pi-Star (unofficial notes about setting up and using Pi-Star):
https://amateurradionotes.com/pi-star.htm
User avatar
w7efs
Posts: 335
Joined: Sun Apr 22, 2018 4:26 pm

Re: Update/Upgrade fails with error...

Post by w7efs »

Code: Select all

cat /etc/resolv.conf
will show what nameservers are reporting the DNS; the problem might lie with them.
User avatar
G8SEZ
Posts: 556
Joined: Fri Apr 13, 2018 8:26 pm

Re: Update/Upgrade fails with error...

Post by G8SEZ »

G8OGJ wrote: Tue Sep 17, 2019 3:43 pm Folks,

I get this when trying to update my pi-star from the internal web page:

Fatal: unable to access 'https://github.com/AndyTaylorTweet/Pi-S ... aries.git/': Could not resolve host: github.com

The pi-star system is running alright so I don't believe that this is a DNS error (at least at my end). Any thoughts as to the cause? The same happened yesterday.

Regards,

Ian
Something was up with github earlier today, I couldn't get the page for Andy's stuff to load. It could have been that.
--

Brian G8SEZ
Post Reply