Guys,
Not sure 100% if this is related to a specific mode, or to hardware.
#1 - ZUMspot on Pi Zero set on DMR only (new one with 1.3" screen) - CPU load 0.95 / 0.51 / 0.23 at 35.8°C (this is with no heatsink).
#2 - JumboSpot on Pi Zero with small screen set on YSF only (and not connected) - CPU load 2.22 / 1.33 / 0.9 at 44.4° C (and this is with a big-ass 14mm heatsink!).
Can anyone tell me why the Fusion hotspot is idling at such a higher CPU load, even with no active connector selected?
I'm going to let the Fusion Jumbo run overnight to see how it looks in the AM...
CPU load issues on Pi Zero
General support for the Pi-Star System
Return to “Pi-Star General Support”
Jump to
- Pi-Star Information
- ↳ Announcements
- ↳ Feature Requests
- ↳ FAQ
- Software Support
- ↳ Pi-Star General Support
- ↳ WiFi Setup
- ↳ IP Networking
- ↳ D-Star Specific Support
- ↳ DMR Specific Support
- ↳ YSF Specific Support
- ↳ P25 Specific Support
- ↳ NXDN Specific Support
- ↳ POCSAG Specific Support
- Hardware Support
- ↳ Raspberry Pi Foundation Hardware
- ↳ Friendly Arm Nano Pi Neo / Neo Air
- ↳ Hardkernel Odroid XU3 / XU4
- ↳ Orange Pi Zero
- ↳ Nextion Screens
- ↳ OLED Screens
- ↳ ZUMSpot (Hat / Libre / USB)
- ↳ MMDVM_HS Hat(s)
- ↳ DV-Mega Hat(s)
- ↳ DV-Mega GMSK Arduino
- ↳ DVAP Dongle
- ↳ DVR-PTR V1 V2 V3
- ↳ Other MMDVM Modem Boards
- ↳ Other All-in-one Boards with included RF
- ↳ Radio Equipment
- Repeater Keepers
- ↳ Software Support
- ↳ Hardware Support
- ↳ Everything Else
- Tutorials
- ↳ W1MSG Video Tutorials
- ↳ User Submitted Video Tutorials
- ↳ Tips and Tricks
- General Conversation
- ↳ Share your stuff
- ↳ I'm new here
- ↳ CQ CQ CQ
- ↳ I need to vent
- ↳ The Bar