4.1.0 RC6 20191105 dashboard now displaying M1ABC

[KN2TOD]

As of the 20191105 dashboard for 4.1.0 RC6, the browser tab and dashboard banner are now displaying M1ABC rather than the callsign from the configuration as it previously did.

[KN2TOD]

Timezone also reverted back to GMT (UK) time. All this in spite of config settings.

[MW0MWZ]

You had modified the dashboard in some way and when I patched it in the last few days, my updates replaced yours.
Just press "apply" on the config page and it will put your callsign back - you can re-set the timezone while you are there too

[KN2TOD]

That fixed it! And, yes, I had been running an update or two the last couple of days (via the dashboard update selection).

But this exposes another problem: my 9-digit DMR id (7+2 postfix) has reverted back to its 7 digit form (again). It appears the 9-digit form can not be set via the regular config page but instead can only be set via the MMDVMHost expert page. Is this by design?

[MW0MWZ]

Under your callsign, it should be 7 digits, and then set the extension on the actual mode (drop down further down the config).

[KN2TOD]

I do that and my DMR id (for the hotspot) shows the 7 digit form on the admin dashboard. OK, but then, for each of my hotspots, how do I know which 9-digit id it's operating under by just glancing at the dashboards? Do I need to drill down to the configs each time to verify the extended id's haven't (been) changed?