New Hotspot
New Hotspot
I finally got my new home brew hotspot put together and hooked up. I got into setup and was doing all the configuring and when I got down to setting up Wifi I chose the correct wifi and entered the information, then clicked "Save and connect" and waited a good long time then I clicked "Apply changes and when everything reset I went down to the "Wireless information" area and the wifi was not there. So, I clicked on"Reset WIfi adapter" and the section went blank and it kicked me out of the setup. And now I can't get back to setup to try to get my wifi configured. any help will be greatly appreciated. 73.
Re: New Hotspot
You can try this.
Close your hotspot and remove the power.
Take the SD cart to your computer.
Go to this site and make the file.
https://www.pistar.uk/wifi_builder.php
Then save the file on your computer for later use.
Copy the file to the root of the SD card
Remove the SD Card on the safe way.
Insert the SD Card in your hotspot and power on.
I do that when it will nok work.
IF you have made a config backup, you can copy the .zip file with the backup to the root of the SD Card, and most of your settings will be done
I hope I not missed something. Good luck.
Ole - OZ1CBK
Close your hotspot and remove the power.
Take the SD cart to your computer.
Go to this site and make the file.
https://www.pistar.uk/wifi_builder.php
Then save the file on your computer for later use.
Copy the file to the root of the SD card
Remove the SD Card on the safe way.
Insert the SD Card in your hotspot and power on.
I do that when it will nok work.
IF you have made a config backup, you can copy the .zip file with the backup to the root of the SD Card, and most of your settings will be done
I hope I not missed something. Good luck.
Ole - OZ1CBK
Re: New Hotspot
Andrew M1DNS.
Pi-star Admin Team.
Pi-star Admin Team.
Re: New Hotspot
HOW did you "got into setup"? Using a hardwired ethernet cable, or using the AutoAP (where the R-Pi becomes an access point using an SSID similar to pistar-setup).
Experience has been that if you have an Ethernet cable connection, the WiFi is not used at all.Wifi I chose the correct wifi and entered the information, then clicked "Save and connect" and waited a good long time then I clicked "Apply changes and when everything reset I went down to the "Wireless information" area and the wifi was not there.
If you were using the AutoAP, your router connection tends not to go active until a reboot of the R-Pi. And once it does go active, you can not use the "pistar-setup" SSID to connect (it won't be there) -- instead you have to use pistar or pistar.local has the host name in a browser (presumes you did not change the hostname field) going through your regular router.
Have you checked your router WiFi client list to see if the pistar node shows up? (from my u-Verse router)So, I clicked on"Reset WIfi adapter" and the section went blank and it kicked me out of the setup. And now I can't get back to setup to try to get my wifi configured. any help will be greatly appreciated. 73.
Code: Select all
IP Allocation
IPv4 Address / Name MAC Address Status Allocation Action
192.168.1.68 / EPSONF4EF32 00:26:ab:f4:ef:32 on DHCP Allocation
192.168.1.65 / DIRECTV-HR54-C94828D7 18:16:c9:48:28:d9 on DHCP Allocation
192.168.1.72 / android-f2715b5ffc0fee68 58:b0:d4:3b:09:ee off DHCP Allocation
192.168.1.74 / unknown64c6670531d3 64:c6:67:05:31:d3 off DHCP Allocation
192.168.1.70 / Galaxy-S9 8c:45:00:6d:1a:4c on DHCP Allocation
192.168.1.79 / pi-star-3b b8:27:eb:4b:0b:d5 on DHCP Allocation
192.168.1.253 / microdiversity b8:27:eb:9b:e4:be on DHCP Allocation
192.168.1.76 / rpi3bplus-1 b8:27:eb:ae:8d:65 off DHCP Allocation
192.168.1.252 / microdiversity b8:27:eb:ce:b1:eb on DHCP Allocation
192.168.1.66 / ElusiveUnicorn b8:ca:3a:79:0c:36 on DHCP Allocation
192.168.1.84 / HP7C548D c4:65:16:7c:54:8d on DHCP Allocation
--
AF6VN
Dennis L Bieber
Re: New Hotspot
Thanks for all the posts. I finally got it working as designed. My problem was that the IP address changed at some point and I could not find the new one. I got a lot of posts on that one. The thing that made it was an app called Fling. It showed me the IP address for each component connected to my Wifi. I want to thank each person who posted for me. Happy Veterans Day to all Veterans.