Hi All
I have a perfectly working hotspot but something strange is happening.
Randomly my hotspot stops receiving.
The dashboard is still active.
If I do a reboot, simply push save changes or use update, everything starts receiving again.
My conclusion is that the services stop working and have to be restarted.
Is there a command I can use in the SSH to start the services so I can see if my conclusion is correct.
Many thanks in advance
Isaac
PA0ISK
receive stops randomly
Re: receive stops randomly
Thanks
No luck to start the receiving again that way
Here are the last line of the mmdvm log.
I use my handy only to listen, I never transmit with hotspot when this happens.
Sometime I can listen for hours sometime only a few minutes.
M: 2019-11-17 20:27:28.643 YSF, received network end of transmission from KC9EOD to ALL , 2.3 seconds, 0% packet loss, BER: 0.0%
M: 2019-11-17 20:29:03.186 YSF, received network data from N3ZF/BERNI to 21080G0JnW at N5YX
M: 2019-11-17 20:29:13.486 YSF, received network end of transmission from N3ZF/BERNI to 21080G0JnW, 10.4 seconds, 0% packet loss, BER: 0.0%
M: 2019-11-17 20:29:28.306 YSF, received network data from N3ZF/BERNI to 21080G0JnW at N5YX
M: 2019-11-17 20:29:32.816 YSF, received network end of transmission from N3ZF/BERNI to 21080G0JnW, 4.6 seconds, 0% packet loss, BER: 0.0%
M: 2019-11-17 20:31:06.265 YSF, received network data from N7MEK to *****E5BCE at N5YX
M: 2019-11-17 20:31:07.107 YSF, received network end of transmission from N7MEK to *****E5BCE, 0.9 seconds, 0% packet loss, BER: 0.0%
M: 2019-11-17 20:31:21.227 YSF, received network data from N3ZF/BERNI to 21080G0JnW at N5YX
M: 2019-11-17 20:31:32.246 YSF, received network end of transmission from N3ZF/BERNI to 21080G0JnW, 11.3 seconds, 0% packet loss, BER: 0.0%
M: 2019-11-17 20:33:33.531 YSF, received network data from PA0ISK-ND to ALL at PA0ISK
M: 2019-11-17 20:33:34.004 YSF, received network end of transmission from PA0ISK-ND to ALL , 0.6 seconds, 0% packet loss, BER: 0.0%
After the last line receiving stops and I have to reset.
Open to all suggestions.
No luck to start the receiving again that way
Here are the last line of the mmdvm log.
I use my handy only to listen, I never transmit with hotspot when this happens.
Sometime I can listen for hours sometime only a few minutes.
M: 2019-11-17 20:27:28.643 YSF, received network end of transmission from KC9EOD to ALL , 2.3 seconds, 0% packet loss, BER: 0.0%
M: 2019-11-17 20:29:03.186 YSF, received network data from N3ZF/BERNI to 21080G0JnW at N5YX
M: 2019-11-17 20:29:13.486 YSF, received network end of transmission from N3ZF/BERNI to 21080G0JnW, 10.4 seconds, 0% packet loss, BER: 0.0%
M: 2019-11-17 20:29:28.306 YSF, received network data from N3ZF/BERNI to 21080G0JnW at N5YX
M: 2019-11-17 20:29:32.816 YSF, received network end of transmission from N3ZF/BERNI to 21080G0JnW, 4.6 seconds, 0% packet loss, BER: 0.0%
M: 2019-11-17 20:31:06.265 YSF, received network data from N7MEK to *****E5BCE at N5YX
M: 2019-11-17 20:31:07.107 YSF, received network end of transmission from N7MEK to *****E5BCE, 0.9 seconds, 0% packet loss, BER: 0.0%
M: 2019-11-17 20:31:21.227 YSF, received network data from N3ZF/BERNI to 21080G0JnW at N5YX
M: 2019-11-17 20:31:32.246 YSF, received network end of transmission from N3ZF/BERNI to 21080G0JnW, 11.3 seconds, 0% packet loss, BER: 0.0%
M: 2019-11-17 20:33:33.531 YSF, received network data from PA0ISK-ND to ALL at PA0ISK
M: 2019-11-17 20:33:34.004 YSF, received network end of transmission from PA0ISK-ND to ALL , 0.6 seconds, 0% packet loss, BER: 0.0%
After the last line receiving stops and I have to reset.
Open to all suggestions.
Re: receive stops randomly
Which YSF Host are you using, and with what Pi-Star version on what RPi hardware and connected radio? I'll listen and see if the problem duplicates here with a dual-band DVMega radio on an RPi B Plus with Pi-Star v4.1.0 rc6. Currently I link to: