forum.pistar.uk

All, we have a repeater running PI-STAR with a STM32 board. I would liek to have Slot1 connect to XLXxxx module B and SLot2 connect to XLXxxx module A. Is there any way to do that in the current build? I know I can use HBlink but was hoping for a internal solution.

NOTE: The repeater has limited access so it is still running 3.4.17 until this years visit, then I will swap SD Cards.

The XLX connectivity that is built into DMRGateway is designed for a single target, and a single time-slot, in short the way to do what you want is to get creative