two XLX Modules one repeater

General support for the Pi-Star System
Post Reply
W8DSB
Posts: 30
Joined: Thu Jun 14, 2018 5:54 pm

two XLX Modules one repeater

Post by W8DSB »

All, we have a repeater running PI-STAR with a STM32 board. I would liek to have Slot1 connect to XLXxxx module B and SLot2 connect to XLXxxx module A. Is there any way to do that in the current build? I know I can use HBlink but was hoping for a internal solution.

NOTE: The repeater has limited access so it is still running 3.4.17 until this years visit, then I will swap SD Cards.
User avatar
MW0MWZ
Site Admin
Posts: 1505
Joined: Wed Apr 04, 2018 9:15 pm
Location: Wales, UK
Contact:

Re: two XLX Modules one repeater

Post by MW0MWZ »

The XLX connectivity that is built into DMRGateway is designed for a single target, and a single time-slot, in short the way to do what you want is to get creative :)
Andy

73 de MW0MWZ
http://pistar.uk
Post Reply