Hi,
When pi-star software will support FM Mode?
Looking forward for any reply.
73
Horacio
FM Mode Support
Re: FM Mode Support
Hi Dennis,
Thanks for your reply.
I already checked that posts.
We test it and the software supports FM mode, but it is not "official".
Best 73
Thanks for your reply.
I already checked that posts.
We test it and the software supports FM mode, but it is not "official".
Best 73
Re: FM Mode Support
You will need to update the firmware of your controller to be at least 20200520 (think that's the format used) otherwise it will not work as intended.
Cheers
Sent from my Pixel 4 XL using Tapatalk
Cheers
Sent from my Pixel 4 XL using Tapatalk
Re: FM Mode Support
Hi,
We already have that update.
The issue is when the mmdvmhost that runs pi-star is will support FM mode.
Thanks!
73
We already have that update.
The issue is when the mmdvmhost that runs pi-star is will support FM mode.
Thanks!
73
Re: FM Mode Support
Is that the status on the MMDVM development site? If so, I'm pretty certain Pi-Star won't include it until it does go "official".
--
AF6VN
Dennis L Bieber
Re: FM Mode Support
The back end is already done. But currently none of the config page entries have been built.
Sent from my SM-G935F using Tapatalk
Sent from my SM-G935F using Tapatalk
Andrew M1DNS.
Pi-star Admin Team.
Pi-star Admin Team.
Re: FM Mode Support
0K Andrew but ...
When do you think that configuration will be ready so that the FM mode is another available mode?
And on the other hand ...
Does Pis-tar use a specially dedicated compiled MMDVMHost? So if it were ... could you please update the MMDVMHost in order to be able to take advantage of all its strengths?
Thanks
Horacio - LU1BJW
When do you think that configuration will be ready so that the FM mode is another available mode?
And on the other hand ...
Does Pis-tar use a specially dedicated compiled MMDVMHost? So if it were ... could you please update the MMDVMHost in order to be able to take advantage of all its strengths?
Thanks
Horacio - LU1BJW
Re: FM Mode Support
The mmdvmhost that supports fm is already in the latest pistar releases. You'll need to update the firmware in ur repeater board thats as long as it supports FM. You could get going now if you wanted by copying the FM config manually editing mmdvmhost.ini
[FM]
Enable=1
# Callsign=
CallsignSpeed=20
CallsignFrequency=1000
CallsignTime=10
CallsignHoldoff=0
CallsignHighLevel=50
CallsignLowLevel=20
CallsignAtStart=1
CallsignAtEnd=1
CallsignAtLatch=0
RFAck=K
ExtAck=N
AckSpeed=20
AckFrequency=1750
AckMinTime=4
AckDelay=1000
AckLevel=50
# Timeout=180
TimeoutLevel=80
CTCSSFrequency=88.4
CTCSSThreshold=30
CTCSSLevel=20
HangTime=7
UseCOS=1
COSInvert=0
RFAudioBoost=1
MaxDevLevel=90
ExtAudioBoost=1
Sent from my SM-G935F using Tapatalk
[FM]
Enable=1
# Callsign=
CallsignSpeed=20
CallsignFrequency=1000
CallsignTime=10
CallsignHoldoff=0
CallsignHighLevel=50
CallsignLowLevel=20
CallsignAtStart=1
CallsignAtEnd=1
CallsignAtLatch=0
RFAck=K
ExtAck=N
AckSpeed=20
AckFrequency=1750
AckMinTime=4
AckDelay=1000
AckLevel=50
# Timeout=180
TimeoutLevel=80
CTCSSFrequency=88.4
CTCSSThreshold=30
CTCSSLevel=20
HangTime=7
UseCOS=1
COSInvert=0
RFAudioBoost=1
MaxDevLevel=90
ExtAudioBoost=1
Sent from my SM-G935F using Tapatalk
Andrew M1DNS.
Pi-star Admin Team.
Pi-star Admin Team.
Re: FM Mode Support
Good morning,
Thanks Andrew, I'm afraid your version of the MMDVMHost doesn't accept the KerchunkTX = 1 command.
As if it appears in:
https://github.com/g4klx/MMDVMHost/comm ... e0f3132668
Thanks
Horacio - LU1BJW
Thanks Andrew, I'm afraid your version of the MMDVMHost doesn't accept the KerchunkTX = 1 command.
As if it appears in:
https://github.com/g4klx/MMDVMHost/comm ... e0f3132668
Thanks
Horacio - LU1BJW