Page 1 of 1

SSH Access Issue

Posted: Wed Jan 13, 2021 8:44 pm
by WB5EKU
I have Pi-star set up on my multi-mode repeater. I can login to to it and control it fine, with the exception of
SSH Access. All I get is a white screen and it is not accessing the R-Pi. I have tried changing the Value i the Firewall Configuration
to both Private and Public. Nothing works.
The router at the site does allow port 22.
At home I can access SSH on all of my hotspots with PI-Star.
I cannot figure out what I am doing incorrectly.
Any suggestions are welcome
Thanks
Don WB5EKU

Re: SSH Access Issue

Posted: Wed Jan 13, 2021 10:07 pm
by KE7FNS
WB5EKU wrote: Wed Jan 13, 2021 8:44 pm The router at the site does allow port 22.
It sounds like you are trying to use the SSH-access option from the dashboard and if thats the case it isn't using port 22, it uses port 2222 and shouldn't need to be forwarded outside of the RPi.

I would reimage and restore the configuration on the SD card and see if the problem still exists. It might be that the software used to display the web terminal has some sort of problem.

I also would avoid port forwarding 22 on your router.

Re: SSH Access Issue

Posted: Thu Jan 14, 2021 1:39 am
by WB5EKU
That did it! I must have missed it, but never ran into this before.
Thanks
73
Don
WB5eku

Re: SSH Access Issue

Posted: Thu Jan 14, 2021 1:41 am
by WB5EKU
That did it! I must have missed it, but never ran into this before.
Thanks
73
Don
WB5EKU