DMRGateway Enable=1 reverts back to 0

General support for the Pi-Star System
Post Reply
ke6upi
Posts: 1
Joined: Thu Feb 25, 2021 6:52 pm

DMRGateway Enable=1 reverts back to 0

Post by ke6upi »

Hello,

I have setup DMRGateway. On [DMR Network 3]. I set Enable to 1 hit apply. Reboot. If I make any changes on the Configuration page. Then DMRGateway [DMR Network 3] reverts back to 0.

Any ideas for a fix?

Pi-Star V 4.1.2 and 4.1.4

Thanks, David
KE6UPI
User avatar
W1KMC
Posts: 133
Joined: Wed May 02, 2018 8:34 pm
Location: Bangor, ME USA
Contact:

Re: DMRGateway Enable=1 reverts back to 0

Post by W1KMC »

Change your network 3 to network 4

Network 3 is the DMR2XXX crossover mode -- it will revert to disabled as it is reading the crossover state(s)
I am no developer, guru, expert, nor do I claim to be or want to be. All advice I give is purely from experience and my efforts to help others.

W1KMC - Kevin M Carman
Bangor, ME
Jumbospot on a Pi0W
DMR 3123142 & 3123143
HHUS Trunk Ext 4329
Post Reply