Up Dated to 4.1.4

General support for the Pi-Star System
Post Reply
WB4SJN
Posts: 48
Joined: Fri Apr 13, 2018 5:05 pm

Up Dated to 4.1.4

Post by WB4SJN »

I recently updated to 4.1.4 and just noticed today that my DMR Configuration has changed. I was able to get my hotspot ID replaced but there are other changes that I am not familiar with. Is there a place to find what the configuration section should look like?
N4VOX
Posts: 1
Joined: Mon Aug 03, 2020 3:49 pm

Re: Up Dated to 4.1.4

Post by N4VOX »

I too just updated to 4.1.4 from 3.4.17 by writing the image to the SD card, then restoring settings, and found the DMR configuration had changed. When I tried to match what I had before (BM_3102, or BM_3104, etc.) it would no longer work. After playing for a while I found that setting DMR Master to the first option, DMRGateway, then DMR ESSID to none, everything worked again. fwiw, I've always had a BM hotspot password in place.

Did you have success getting it working?

This thread talks about it in more detail: viewtopic.php?f=3&t=3583
Post Reply