Frequency changes to 0Mhz when enabling D-Star

General support for the Pi-Star System
Post Reply
KE5ZZN
Posts: 7
Joined: Thu May 20, 2021 8:54 pm

Frequency changes to 0Mhz when enabling D-Star

Post by KE5ZZN »

Hello all,

I have run into an interesting issue. I noticed this issue and then re-imaged my hotspot, it survived the re-image.

Steps to reproduce:
1. Fresh image
2. Complete 'General Configuration' section
3. Enable DMR Mode
4. Configure DMR (DMR works as expected at this point)
5. Disable DMR
6. Enable D-Star and hit apply

Once D-Star is enabled, the radio frequency changes to 0Mhz and D-Star no longer shows enabled. I have tried re-entering the frequency and hitting apply, but it doesn't change anything. I have checked /etc/mmdvmhost and the frequency is still there.

Code: Select all

pi-star@pi-star(rw):etc$ MMDVMHost -v
MMDVMHost version 20210617_PS4 git #9106fd6
Any suggestions on what to check next?



Thanks,
Jake
Post Reply