MMDVM/Pi-Star Won't Respond to RF Link & Unlink

General support for the Pi-Star System
Post Reply
g8nsz
Posts: 19
Joined: Sat Jun 13, 2020 4:28 pm

MMDVM/Pi-Star Won't Respond to RF Link & Unlink

Post by g8nsz »

Hi All. For the last week, or so, my clone MMDVM Hat/Pi Zero system has stopped responding to attempts to Link, Change, or Unlink to Reflectors using RF. This only happens on the first attempt of the day - after the overnight re-boot. It works happily from the dashboard after which it responds normally for the rest of the day using either the 705 or E92D. It doesn't matter what I ask it to do from the dashboard in the way of linking or unlinking. Once it has been 'prodded' from the Dashboard it works fine thereafter. Current setup is Pi-Star:4.1.5 / Dashboard: 20210621.

Any thoughts?

73 de Mike - G8NSZ
W7DJS
Posts: 9
Joined: Fri Dec 27, 2019 7:52 am

Re: MMDVM/Pi-Star Won't Respond to RF Link & Unlink

Post by W7DJS »

G8NSZ -

It’s probably related to this issue, which looks like has been resolved. I manually updated and things returned to normal.

https://forum.pistar.uk/viewtopic.php?f=6&t=3718
g8nsz
Posts: 19
Joined: Sat Jun 13, 2020 4:28 pm

Re: MMDVM/Pi-Star Won't Respond to RF Link & Unlink

Post by g8nsz »

Thanks, I'll give it a go and see what happens tomorrow:-)

Mike
g8nsz
Posts: 19
Joined: Sat Jun 13, 2020 4:28 pm

Re: MMDVM/Pi-Star Won't Respond to RF Link & Unlink

Post by g8nsz »

W7DJS wrote: Mon Jul 12, 2021 3:20 am G8NSZ -

It’s probably related to this issue, which looks like has been resolved. I manually updated and things returned to normal.

https://forum.pistar.uk/viewtopic.php?f=6&t=3718
Nope, that didn't work. Just tried to link this morning, after the overnight reboot, but no luck. However, the hotspot does respond to the "I" command and it echos with the "E" command so it is listening to the RF; it just wont connect or disconnect:-(
Post Reply