XLX Reflector and Pi-Star on same network issues.

[w1get]

When using a local IP address and a xlx reflector on the same network the pi-star keeps disconnecting every 60 seconds.

Scenario:
pi star = 10.100.1.80
xlx reflector = 10.100.1.7

I edit the pi-star DExtra_Hosts.txt file and add my local IP for the xlx reflector to use so it does not try to go outside my network.
I am able to connect to the xlx server and everything works, however it keeps disconnecting every 60 seconds.

If I do not edit the DExtra_Hosts.txt file and let it go out my firewall instead to my registered domain name for the xlx it will not connect to the xlx reflector, possibly due to my firewall and nat+proxy setting..

[w1get]

tailing the logs I see the following.

==> ircDDBGateway-2021-09-09.log <==
M: 2021-09-09 13:29:19: DExtra link to XLXGET B has failed (poll inactivity)
M: 2021-09-09 13:29:19: DExtra link to XLXGET B has failed, relinking

==> ircDDBGateway-2021-09-09.log <==
M: 2021-09-09 13:29:19: DExtra ACK message received from XLXGET B
M: 2021-09-09 13:29:19: DExtra link to XLXGET B established

==> MMDVM-2021-09-09.log <==
M: 2021-09-09 13:29:19.741 D-Star link status set to "Linked to XLXGET B "
tail: Links.log: file truncated

==> Links.log <==
2021-09-09 13:14:56: DExtra link - Type: Repeater Rptr: W1GET B Refl: XLXGET B Dir: Outgoing

[RC3C]

It seems no any answers here

I have DMR Gateway on my PI-STAR. And I have in the same network DSTAR XLX
Pi-star 192.168.80.200
XLX-REF 192.168.80.10

Which file to edit for this connection make possible from pi-star?
TNX

[RC3C]

It seems no any answers here

I recall there was another thread about a similar issue, and it was a programming issue where things were being disconnected after 60 seconds, it was patched which solved this persons disconnection issue.

Which file to edit for this connection make possible from pi-star?

/etc/dmrgateway

Ah, understood.
Thanks.