New Firmware v1.4.1 Released

MMDVM_HS Hat hardware
Post Reply
User avatar
KD9JTV
Posts: 47
Joined: Fri Apr 13, 2018 4:35 am
Location: Martinsville, Indiana, USA
Contact:

New Firmware v1.4.1 Released

Post by KD9JTV » Wed Jul 11, 2018 2:20 am

New firmware for the MMDVM_HS_Hat has been released. You can upgrade by entering the following in "Expert", "SSH Access":

sudo pistar-mmdvmhshatflash hs_hat

I am running three Jumbo Spots. One of them upgraded fine the first time (running YSF). The other two had to have the upgrade ran on them a second time, then power cycled before they would function properly (one running YSF, one running DMR). Also I did not have to change the RXOffset after the upgrade for them to work.

Good luck!!

-Jeff, K9JTV

User avatar
KE0FHS
Posts: 169
Joined: Wed Apr 11, 2018 8:40 pm
Location: Colorado, USA
Contact:

Re: New Firmware v1.4.1 Released

Post by KE0FHS » Wed Jul 11, 2018 11:53 am

Thanks, Jeff!

I did the same firmware update to 1.4.1 for the MMDVM_HS_Hat board by Mathis, DB9MAT, and Florian, DF2ET, with the onboard 12.288 MHz TCXO connected to GPIO:
sudo pistar-mmdvmhshatflash hs_hat-12mhz
as well as to two of my ZUMspots:
sudo pistar-zumspotflash rpi
All three updated flawlessly.

1.4.1 apparently fixes some minor bugs in 1.4.0 that Florian reported to Andy, CA6JAU. Good stuff!
73, Toshen, KE0FHS
Playing with Pi-Star article: http://pi-star.ke0fhs.com

G8SEZ
Posts: 20
Joined: Fri Apr 13, 2018 8:26 pm

Re: New Firmware v1.4.1 Released

Post by G8SEZ » Wed Jul 18, 2018 11:31 am

1.4.3 is now released as well, it tidies up and improves some ring buffer size allocations and fixes some alternate LED settings.
--

Brian G8SEZ

Post Reply