TCXO info now shown on dashboard

[KE0FHS]

Nice update today (dashboard v20181214): the TCXO chip info is now shown on the dashboard in the Radio Info section so you easily identify whether your hotspot's TCXO chip is running at 12.288 or 14.7456 MHz.

pi-star-dashboard-radio-info-2.jpg

This info is needed to determine which firmware update to apply, for example, with the MMDVM_HS_HAT or MMDVM_HS_DUAL_HAT, there are separate firmware update script commands:

MMDVM_HS_Hat board with 14.7456 MHz TCXO1 connected to GPIO:

Code: Select all

sudo pistar-mmdvmhshatflash hs_hat

MMDVM_HS_Hat board with 12.288 MHz TCXO connected to GPIO:

Code: Select all

sudo pistar-mmdvmhshatflash hs_hat-12mhz

MMDVM_HS_DUAL_Hat board with 14.7456 MHz TCXO connected to GPIO:

Code: Select all

sudo pistar-mmdvmhshatflash hs_dual_hat

MMDVM_HS_DUAL_Hat board with 12.288 MHz TCXO connected to GPIO:

Code: Select all

sudo pistar-mmdvmhshatflash hs_dual_hat-12mhz

[dh3ybe]

Hi Toshen,

thanks a loz for that information and for your support here and your websites. Did help me alot in the past.

And thanks to this nice forum with a lot of people supporting pistar.

73
Kai
dh3ybe