forum.pistar.uk

Posted: **Thu May 02, 2019 12:59 pm**

Hello guys.

I need help a bit if possible to fix an issue here. I have MMDVM_HS_hat version of pi-star node at home.

: rc3c-pistar.PNG (3.83 KiB) Viewed 6142 times

The issue is unable to mount /

Here is screenshot :

: RO_pi-star.png (28.81 KiB) Viewed 6150 times

and (I am thinking so) I have trouble to update my system via web-interface

: Update_pi-star.png (42.26 KiB) Viewed 6150 times

Is there an idea to make / "write" and update system?
Thank you for any kind of information.

Posted: **Thu May 02, 2019 2:47 pm**

Power OFF / ON doesn't help to fix an issue.

Posted: **Thu May 02, 2019 2:50 pm**

I have MMDVM like this

: r0adnAYvfN4[1].jpg (196.47 KiB) Viewed 6138 times

RPi-0

: rpi-0.PNG (6.55 KiB) Viewed 6137 times

Posted: **Thu May 02, 2019 4:54 pm**

Try again using superuser command

sudo rpi-rw

Andrew M1DNS, (Mod)

Posted: **Thu May 02, 2019 5:17 pm**

Andrew,

here is screenshot of a command

: rpi-rw_comm.PNG (2.63 KiB) Viewed 6129 times

currently it works ok. It flashes ok by a regular command sudo pistar-mmdvmhshatflash hs_hat
Also, I have

: commm.png (41.35 KiB) Viewed 6129 times

seems all is ok. MMDVM boots OK.
I guess all scripts doing ok IMO

in addition:
it works currently - OK.
Just tried to flash firmware - OK.

Posted: **Thu May 02, 2019 5:39 pm**

also

: dmesg-tail.PNG (28.15 KiB) Viewed 6125 times

Posted: **Fri May 03, 2019 3:08 am**

Hi over there.

Thanks for reply.

1) OK, I'll try to seek some messages about voltage etc..

2)

KE7FNS wrote:and reflash the card,

Can I have manual of that?

3) I did already the BackUp of configuration in ZIP file. [TNX]

Posted: **Fri May 03, 2019 4:32 am**

KE7FNS wrote:reflash microSD card

I guess I got it right on http://9v1kb.blogspot.com/2018/03/how-t ... tspot.html

and this one https://youtu.be/B5G4gYDdJeQ

Posted: **Fri May 03, 2019 5:49 am**

Thanks for reply and support.

KE7FNS wrote:dmesg | grep -i voltage

I have no voltage issues in the log

: volt.PNG (3.56 KiB) Viewed 5406 times

Ok, i'll burn new image on new microSD card

FYI

: fsck-rpi-rc3c.PNG (6.94 KiB) Viewed 5405 times

Posted: **Fri May 03, 2019 4:49 pm**

Hi all.

Seems I just fixed an issue by myself according KE7FNS and related guides, which I found on internet for MMDVM_HS_hat.
1) Made backup of settings from hostpot.
2) Bought new microSD card 16Gb
3) Downloaded image https://www.pistar.uk/downloads/Pi-Star ... n-2019.zip for RPi-zero
4) Downloaded SDcard formatter https://www.sdcard.org/downloads/formatter/
5) Downloaded Etcher https://www.balena.io/etcher/
6) According Guide by 9V1KB https://9v1kb.blogspot.com/2018/03/how- ... tspot.html made preparations
7) According Guide by W1MSG https://www.youtube.com/watch?v=B5G4gYDdJeQ flashed my microSD card
8) microSD card unplugged then plugged again into PC
9) Onto "boot" partition I put "wpa_supplicant.conf" file with WiFi config
10) microSD card unplugged from PC
11) microSD card plugged into hotspot
12) Power ON hotspot
13) Checked DHCP IP leases on my Mikrotik router RB2011
14) Opened browser when I found certain IP address for https://pi-star/ (I have fixed IP 192.168.80.200 on DHCP server)
15) Opened https://pi-star/
16) Opened Configuration --> Backup/Restore
17) Restored hotspot settings from .ZIP file.

Now it works. QSO round tested with RK7K on TG2501.

18) Opened SSH on pi-star and logged on with default credentials
19) Now I have this

: FIXED-rpi_rw.PNG (16.94 KiB) Viewed 5400 times

forum.pistar.uk

failed to update system

failed to update system

Re: failed to update system

Re: failed to update system

Re: failed to update system

Re: failed to update system

Re: failed to update system

Re: failed to update system

Re: failed to update system

Re: failed to update system

Re: failed to update system