Hi All
I have one of those small cube nano spot, came to me unconfigured so had to do a bit of guessing to find which modem to use
it appears to work with
MMDVM_HS_NPIHat (VR2YVE) for Nano PI (GPIO) I believe another modem also worked,
my issue is that when powered on it will only sometimes connect to the modem eg it stays red in mode enabled on the dashboard, several reboots it may come alive and work until its powered off.
I would like to upgrade or re-flash firmware for this board to see if it fixes the issue
unless somone knows a fix
Currenty says (when working) in radio info section on dash
MMDVM_HS:v1.4.17
txco 14.7456Mhz
But I cant for the life of me find a firmware that will flash, they all fail
anyone help out on this one please
thanks
Cliff
ZL1CTS
nano pi hs hat firmware
MMDVM_HS Hat hardware
Jump to
- Pi-Star Information
- ↳ Announcements
- ↳ Feature Requests
- ↳ FAQ
- Software Support
- ↳ Pi-Star General Support
- ↳ WiFi Setup
- ↳ IP Networking
- ↳ D-Star Specific Support
- ↳ DMR Specific Support
- ↳ YSF Specific Support
- ↳ P25 Specific Support
- ↳ NXDN Specific Support
- ↳ POCSAG Specific Support
- Hardware Support
- ↳ Raspberry Pi Foundation Hardware
- ↳ Friendly Arm Nano Pi Neo / Neo Air
- ↳ Hardkernel Odroid XU3 / XU4
- ↳ Orange Pi Zero
- ↳ Nextion Screens
- ↳ OLED Screens
- ↳ ZUMSpot (Hat / Libre / USB)
- ↳ MMDVM_HS Hat(s)
- ↳ DV-Mega Hat(s)
- ↳ DV-Mega GMSK Arduino
- ↳ DVAP Dongle
- ↳ DVR-PTR V1 V2 V3
- ↳ Other MMDVM Modem Boards
- ↳ Other All-in-one Boards with included RF
- ↳ Radio Equipment
- Repeater Keepers
- ↳ Software Support
- ↳ Hardware Support
- ↳ Everything Else
- Tutorials
- ↳ W1MSG Video Tutorials
- ↳ User Submitted Video Tutorials
- ↳ Tips and Tricks
- General Conversation
- ↳ Share your stuff
- ↳ I'm new here
- ↳ CQ CQ CQ
- ↳ I need to vent
- ↳ The Bar