Hi!
I just bought a hotspot card from Swish called "STM32_MMDVM_HS HAT Rev 1.7"
When trying to setup pi-star I can not connect to the radio card.
The view in Dashboard telling me the:
Trx (blank)
Tx 434.300MHz
Rx 434.300MHz
FW HS_Hat:v1.4.7
TCXO: 14.7456 MHz
I have another hotspot running pi-star with DV-MAGA radio card without any problems..
Any idea what to do to get my STM32 hotspot up and running?
My STM32 has NOT the reset button, which I have seen other STM32 cards have.
Thanks!
73 de Peo SM6SMY
STM32-MMDVM_HS HAT not worikng..
Re: STM32-MMDVM_HS HAT not worikng..
Try with the modem set to:
MMDVM_HS_HAT (DB9MAT & DF2ET) for Pi (GPIO)
I expect that the radio you have is a clone of the board developed by these guys.
MMDVM_HS_HAT (DB9MAT & DF2ET) for Pi (GPIO)
I expect that the radio you have is a clone of the board developed by these guys.
--
Brian G8SEZ
Brian G8SEZ
Re: STM32-MMDVM_HS HAT not worikng..
look in General Config. look for radio/modem type then match that to your hotspot card.
check your controller software.
I had issue with mine and that fixed the problem.
check your controller software.
I had issue with mine and that fixed the problem.