MMDVM_RPT_HAT for GPIO
Posted: Mon Feb 22, 2021 3:00 pm
Hi everybody,
I have the above board in a repeater setup running with 2 x GM340 radios. The system is functional and almost to the point of going online, but from the testing I have done it seems the output audio as received by listening stations is a bit too low, and they need to increase there volume. They do say the audio is clean and clear with zero packet loss and Zero bit error rate.
In need to find out I can increase the output volume.
Any hep appreciated
Malcolm M0MCR
I have the above board in a repeater setup running with 2 x GM340 radios. The system is functional and almost to the point of going online, but from the testing I have done it seems the output audio as received by listening stations is a bit too low, and they need to increase there volume. They do say the audio is clean and clear with zero packet loss and Zero bit error rate.
In need to find out I can increase the output volume.
Any hep appreciated
Malcolm M0MCR